Bump Tool (Mudtool)
$24.00
The Bump is made with a solid aluminum shaft that is bendable but not flexible. The sponge end is a very dense material that becomes chamois like when wet and it has a hard ball inside that. The whole thing is designed to allow for great leverage to move clay in those tricky places that you cannot get your hand.
|
Mud Ribs
$7.00
Unlike rubber this material will not develop burrs or cracks. Red ribs are very soft, yellow ribs are soft, green ribs are medium and blue are firm.
|
Mudtool Bowl Ribs
$8.00
These bowl ribs cover a lot of what hand builders and throwers need from a rib. Each rib shape is available in four degrees of hardness; from very soft to very firm.
|
Mudshark Tool
$8.00
The Mudshark is a needle tool and fettling knife in one! The needle folds and locks out of the way so you won't impale your hand when you reach into your tool box.
|
Mudcutter
The Mudcutter is made of stainless steel with a surgical stainless steel wire under tension. Use on production pots for cutting spouts and lugs or like a needle tool. The design lends itself to the slicing and cutting of handbuilding, or at the wheel it fits well in the hand and works great as a faceting tool. Replacement wires are available in packs of three.
Mudcutter Straight Wires $9.00
Mudcutter Curly Wires $15.00
|
Mudcutter Carving Bow
Our new carving bow for cutting, texturing and faceting all clay surfaces. Its compact design gets you closer to your work and is available with a twisted or straight wire. Replacement wires are available in packs of three.
Mudcutter Carving Bow Curly Wires $15.00
Mudcutter Carving Bow Straight Wires $9.00
|
Mudtools, Paisley Scraper
$7.00
SSP
plain smooth edge
|
Mudtools, Paisley Steel Scrapers
$7.00
SSP18
fine 18-tooth serrated
|
Mudtools, 6"x1"-3/8" Smooth Scraper
$7.00
SSL
|
Mudtools, Paisley Scraper
$7.00
SSP24
extra fine 24-tooth serrated
|
Mudtools 6"x1"-3/8" Serrated Scraper
$7.00
SSL18
18 teeth per inch around the rib
|
HAX Tool
$10.00
With its serrated edge, this hacksaw blade is for scoring and manicuring. It is designed specifically for clay, especially for fine particle clay like porcelain. The HAX tool is made of flexible, bendable stainless steel and it can be bent for rounded surfaces and hard to reach areas. Sold in a package of 2.
|
Mudtools 6"x1"-3/8" Serrated Scraper
$7.00
SSL24
extra fine 24-tooth serrated
|
Mudtools, Stainless Steel Rib (SS XL)
$14.00
7.5" X 1.75"
|
Mudtools, Stainless Steel Rib (SS0)
$7.00
2.75" X 1.44"
|
Mudtools, Stainless Steel Rib (SS1)
$7.00
3.5" X 1.75"
|
Mudtools, Stainless Steel Rib (SS2)
$7.00
2.88" X 2.5"
|
Mudtools, Stainless Steel Rib (SS4)
$7.00
5" X 1.94"
|
Mudtools, Stainless Steel Rib (SS5)
$7.00
4.19" X 2"
|
Mudtools, Stainless Steel Rib (SSH015)
$10.00
4.19" X 2"
|
Mudwire (Mudtool)
$7.00
Ergonomically designed, this Mudwire cut off tool is a pleasure to use. Made with the same plastic as our ribs, it will get nicer with use. The 15" wire is a cable of stainless steel that offers clean cuts.
|
Mudtools, Curly Mudwire
$8.00
Ergonomically designed, this Mudwire cut off tool is a pleasure to use. Made with the same plastic as our ribs, it will get nicer with use. The 15"stainless steel wire offers clean and unique cuts.
|
Zipper Bridge and Die Kits (Mudtools)
$250.00
Designed to fit any 4" extruder. Includes 4 zipper bridges, 4 external dies and 8 internal dies and a hex key.
|
Mudtool Shredders
Ideal for shaping or reducing leather hard clay. Custom handle will not clog like standard handles on shure form tools. Replacement blades come in pack of 2.
Mudtool Shredder Tool $8.00
Mudtool Shredder Replacement Blades $5.00
|
Mudsponge (Mudtool)
$6.00
Shaped like the traditional kidney rib, this synthetic sponge is the best tough and consistent sponge available to potters today.
|
